Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: giordano on May 08, 2006, 07:46:11 AM

Title: Step per unit
Post by: giordano on May 08, 2006, 07:46:11 AM

Hi to all. I have read in a forum that the number in the playpen Step for unit it is critical. When Mach3  is installed this number is planned to 2000. I have a microstep controller RTA planned to 800 passi/giros and a screw with pitch 4mm. I have planned the number step for unit to 200. Is it correct? Thanks in advance. Giordano.

Title: Re: Step per unit
Post by: Brian Barker on May 08, 2006, 11:05:15 AM

Sounds right to me :)