Hello Guest it is March 29, 2024, 06:07:15 AM

Author Topic: G 100 no lights on  (Read 4765 times)

0 Members and 1 Guest are viewing this topic.

G 100 no lights on
« on: November 22, 2007, 01:12:26 PM »
Can anyone help me with a G100, I plug the wall adapter in the and only the CH-1 lights come on very dim is this correct .

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: G 100 no lights on
« Reply #1 on: November 22, 2007, 01:24:59 PM »
Have you looked at the set up guide? Have you loaded the firmware?

http://www.machsupport.com/Downloads/machdownloads/G100_Set_Up_Guide_Rev.1_9-19-07.pdf

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: G 100 no lights on
« Reply #2 on: November 22, 2007, 01:40:50 PM »
No I have not loaded firmware, can not load, what I am trying to find out is the unit working.

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: G 100 no lights on
« Reply #3 on: November 22, 2007, 02:44:36 PM »
I'm not sure what one will do if it has no firmware loaded. All of my dir. lights come on brightly and a very dim analog out.

I have sent you a personal message.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline eat

*
  •  7 7
    • View Profile
Re: G 100 no lights on
« Reply #4 on: November 22, 2007, 05:59:59 PM »
hi did you get this figured out mine does the same thing
just the ch-1 lights on dim and then the green one comes on bright
when the firmware starts

please let me know as I cant get mine to turn the motors
have you got yours to move the motors at all
thanks