Hello Guest it is March 28, 2024, 03:08:27 PM

Author Topic: Fanuc Look-a-like screen  (Read 19127 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Fanuc Look-a-like screen
« on: April 11, 2006, 11:13:39 AM »
Hi,

has any body got a turning screen set that looks like the fanuc 6T,11T or 18iT, all the Mach ones I have seen so far are way too complicated and over cluttered.  A nice basic screen is all I want.

Thanks

Graham.
Without engineers the world stops

ynneb

*
Re: Fanuc Look-a-like screen
« Reply #1 on: April 12, 2006, 01:53:25 AM »
Thats a good idea, Can you post some screen captures of each Fanuc page that you want emulated.
I wouldn't have a clue what they looked like, in order to emulate them.

I might get in trouble if I use the word "copy" instead of "emulate."
Re: Fanuc Look-a-like screen
« Reply #2 on: April 18, 2006, 10:19:48 PM »
can any one tell me how to see or download on of these screens
Barry
Re: Fanuc Look-a-like screen
« Reply #3 on: April 19, 2006, 08:39:24 AM »
I am looking for a simple screen to suit a plasma cutting XY table
Barry

ynneb

*
Re: Fanuc Look-a-like screen
« Reply #4 on: April 19, 2006, 08:53:17 AM »
Barry, there is a few screens in this section of the forum, though they are all at experimantal stage. You can edit the current screens with the screen designer found in the mach folder of your installation. Its not too hard to use as you will see. Let us know how you go.
Re: Fanuc Look-a-like screen
« Reply #5 on: November 21, 2019, 04:49:51 PM »
Did anything ever transpire on this request?

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Fanuc Look-a-like screen
« Reply #6 on: November 21, 2019, 06:50:21 PM »
No, it never happened but I did do one for education that may be worth a look.

https://www.machsupport.com/forum/index.php?topic=41385.0
Without engineers the world stops
Re: Fanuc Look-a-like screen
« Reply #7 on: November 21, 2019, 06:53:31 PM »
Hi chuck767,
I notice that you have posts on the Mach4 Disscussion board. If you are indeed using Mach4 or wishing to, then this board will be
of no help to you. This board concerns itself with Mach3 screens and its screen editor, none of which apply to Mach4.

Mach4 runs as Mach4GUI.exe and so the screen is editable without recourse to a separate program as is the case with Mach3. Indeed the
ease and flexibility with which you can edit the screen and its underlying scripts is perhaps the single biggest and most useful change from
Mach3 to Mach4.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'