Hello Guest it is March 28, 2024, 03:00:43 PM

Author Topic: 5 Axis Home Limit trigering simultaneously  (Read 681 times)

0 Members and 1 Guest are viewing this topic.

5 Axis Home Limit trigering simultaneously
« on: April 26, 2021, 06:01:29 AM »
Hello everyone,

I have a problem on my 5 axis CNC with B and C axis Home limits. All axis works fine, the machine is running normally.

The problem is when I press the B Home switch, both B and C are triggered simultaneously in Mach3. And the C switch does nothing.

I tried assigning the same switch to X, Y or Z and works fine. There must be some setting in Mach3 I'm missing.

I attached the video, you can see that I'm pressing the switch on input pin 4 assigned to Y Home and works normaly. Then I assign it to B Home it simultaneously triggers C Home as well.

Hope someone can help.
Thanks!

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: 5 Axis Home Limit trigering simultaneously
« Reply #1 on: April 27, 2021, 05:43:27 AM »
maybe wron in this screenset, have you tryed with standard 1024 screenset?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.