Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: segul684 on April 26, 2021, 06:01:29 AM

Title: 5 Axis Home Limit trigering simultaneously
Post by: segul684 on April 26, 2021, 06:01:29 AM

Hello everyone,

I have a problem on my 5 axis CNC with B and C axis Home limits. All axis works fine, the machine is running normally.

The problem is when I press the B Home switch, both B and C are triggered simultaneously in Mach3. And the C switch does nothing.

I tried assigning the same switch to X, Y or Z and works fine. There must be some setting in Mach3 I'm missing.

I attached the video, you can see that I'm pressing the switch on input pin 4 assigned to Y Home and works normaly. Then I assign it to B Home it simultaneously triggers C Home as well.

Hope someone can help.
Thanks!

Title: Re: 5 Axis Home Limit trigering simultaneously
Post by: TPS on April 27, 2021, 05:43:27 AM

maybe wron in this screenset, have you tryed with standard 1024 screenset?