Hello Guest it is March 29, 2024, 09:17:06 AM

Author Topic: OEMtrig  (Read 4062 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: OEMtrig
« Reply #10 on: February 21, 2021, 11:47:52 AM »
low or high active depends on how your Inputs are connected.

for are quick try you can assign port/pin pin to spare Input and check on diagnostic page
via led's for right Level.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Holk

*
  •  16 16
    • View Profile
Re: OEMtrig
« Reply #11 on: February 22, 2021, 09:56:32 AM »
So i have try it... and it give the msg on all of them, and when i push there come light in, but if i push oemtrig 1 the machine start, and it i after push oem3 to stop it nothing happen, but it i reset again and push oem3 them i light and stop activate, but i can only push one oem, and then it do not react

My idea

Make a file pr oem and in the Main file write a triggermacro Line with all the file names

Oemtriggermacro 334
Oemtriggermacro 335
Oemtriggermacro 336
 

As example ?

Or do you have an idea why its only read one oemtrig ?

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: OEMtrig
« Reply #12 on: February 22, 2021, 10:17:23 AM »
in the sample code oemtrig2 is for stopping not oemtrig3

you can Setup only one triggerfile

pls post your m333.m1s and m334.m1s and a screenshot of your System hotkey Setup Screen.
« Last Edit: February 22, 2021, 10:19:17 AM by TPS »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Holk

*
  •  16 16
    • View Profile
Re: OEMtrig
« Reply #13 on: February 22, 2021, 01:27:47 PM »
i have call it 1919 and 1920 i should not make any difference

Offline Holk

*
  •  16 16
    • View Profile
Re: OEMtrig
« Reply #14 on: February 22, 2021, 01:28:11 PM »
little more

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: OEMtrig
« Reply #15 on: February 22, 2021, 02:30:05 PM »
have you tryed to disable achtive Low?
« Last Edit: February 22, 2021, 02:40:49 PM by TPS »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Holk

*
  •  16 16
    • View Profile
Re: OEMtrig
« Reply #16 on: February 22, 2021, 02:37:31 PM »
real i think... not from keyboard

Offline Holk

*
  •  16 16
    • View Profile
Re: OEMtrig
« Reply #17 on: February 22, 2021, 02:37:53 PM »
from the box

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: OEMtrig
« Reply #18 on: February 22, 2021, 02:41:46 PM »
have you tryed to disable achtive Low?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: OEMtrig
« Reply #19 on: February 22, 2021, 02:44:54 PM »
this files are running, i have tested them.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.