Hello Guest it is April 14, 2021, 06:20:24 PM

Author Topic: pcie to peripheral adaptor driver  (Read 191 times)

0 Members and 1 Guest are viewing this topic.

Offline cruz

*
  •  19 19
    • View Profile
pcie to peripheral adaptor driver
« on: January 17, 2021, 02:47:54 PM »
i'm sure this is a issue more people have had.

i had to do a clean install of windows 7 (32bit) because of issue's with visual c++ file missing.
i then installed mach3 again.
before i did i took screenshots of the installed programs in control panel.
there were 2 PCI controllers installed
1: PCI multi-io controller
2: PCIe to peripheral adaptor

i'll add some pics of the screens and the hardware of the pc.

issue 1 (fixed): when i opend mach3 the screen flashed 2 times then a black screen and then windows restarted itself.
                       i then installed the PCI multi-io controller and this fixed that issue.

issue2: when i run the driver test from the mach3 folder i get the message "no driver sensed installed".
           if i look at my drivers i see a "mach3 pulseing engine" and under it "unknown device"

below it under other devices:
- PCI serial port
- PCI simple communications controller
both have a yellow exclamation mark


looking at any of the drivers properties, it says no driver installed.
the pc has a parallel port, and it used to run mach3 fine before the clean install.

here is a link to all the screenshots and pic they are too big to upload here.
https://mega.nz/folder/mGxm1JzI#6fcfNQ68ROnwt7b6IARJww

i'll try and upload some of them as reply
« Last Edit: January 17, 2021, 03:04:01 PM by cruz »

Offline cruz

*
  •  19 19
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #1 on: January 17, 2021, 02:52:21 PM »
more pics

Offline cruz

*
  •  19 19
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #2 on: January 17, 2021, 02:54:15 PM »
and more :)

Offline ZASto

*
  •  371 371
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #3 on: January 17, 2021, 03:50:14 PM »
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.

Offline cruz

*
  •  19 19
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #4 on: January 17, 2021, 04:54:50 PM »
You need a driver for your LPT board:
https://www.helpjet.net/Fs-50311538-16596496-31586755.html
how do know wich one to install?
where do i have to look?

Offline ZASto

*
  •  371 371
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #5 on: January 17, 2021, 05:59:25 PM »
Download the .zip file, extract it to the convenient place, navigate to folder Wndows, then 32bit and execute Setup.exe
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.

Offline cruz

*
  •  19 19
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #6 on: January 17, 2021, 06:04:54 PM »
Download the .zip file, extract it to the convenient place, navigate to folder Wndows, then 32bit and execute Setup.exe
okay i'll try it tomorrow, and let you know how it went. thank you.

Offline cruz

*
  •  19 19
    • View Profile
Re: pcie to peripheral adaptor driver
« Reply #7 on: January 18, 2021, 11:13:48 AM »
Download the .zip file, extract it to the convenient place, navigate to folder Wndows, then 32bit and execute Setup.exe
hi
The file you gave was already installed, it was the pci multi io controller.
On the screenshot of the old windows you can see I also had a PCIe to peripheral adaptor installed.
Maybe that is what I need, but I can find it online.