Hello Guest it is January 15, 2021, 09:42:23 AM

Author Topic: CNC 5040 z-axis problem  (Read 141 times)

0 Members and 1 Guest are viewing this topic.

Re: CNC 5040 z-axis problem
« Reply #10 on: January 03, 2021, 08:09:00 AM »
Next question is about cuting depth, it is perfect 1/2 from set. If i set up cut 18mm plywood machine cut only 9mm. if i set up 36mm machine cut 18mm plywood without problem.
 I need change z- axis steps increase in Motor tuning and setup?

Offline ZASto

*
  •  343 343
    • View Profile
Re: CNC 5040 z-axis problem
« Reply #11 on: January 03, 2021, 12:26:00 PM »
Yes, you have to double Steps Per.
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.