Hello Guest it is March 28, 2024, 12:05:52 PM

Author Topic: Stack lights LED Signal Tower  (Read 780 times)

0 Members and 1 Guest are viewing this topic.

Stack lights LED Signal Tower
« on: August 06, 2020, 02:14:31 PM »
hi

i am searching for a script in mach4 for this Stack lights LED Signal Tower like this one in mach3:
https://en.cs-lab.eu/macro-for-a-signal-tower/
has anyone built something like this?

best regards
thebassbox
Re: Stack lights LED Signal Tower
« Reply #1 on: August 07, 2020, 09:35:39 AM »
This can be done by just mapping Mach4 outputs (Feed hold, G-Code Running, Machine Idle etc.) to the outputs of your controller to which the light is connected

To get a light to flash it would have to be done in the signal library using a wxTimer.
Re: Stack lights LED Signal Tower
« Reply #2 on: August 07, 2020, 01:40:18 PM »
thank you
Feed hold and G-Code Running I can find, but Machine Idle is not in the Output settings