Hello Guest it is March 18, 2024, 11:14:54 PM

Author Topic: Mach3 ATC screenset ER25 collet  (Read 1176 times)

0 Members and 1 Guest are viewing this topic.

Mach3 ATC screenset ER25 collet
« on: May 10, 2020, 01:20:20 AM »
Hi I am looking for a screenset for 8 tool change which uses air for mach3 on WIN7. regards Stuart

Offline Graham Waterworth

*
  • *
  •  2,667 2,667
  • Yorkshire Dales, England
    • View Profile
Re: Mach3 ATC screenset ER25 collet
« Reply #1 on: May 10, 2020, 09:01:29 AM »
Not enough information,  some pictures would help and a bit more info like do you have it tool changing now or are you wanting a M6Start.m1s macro to control your tool changer.

If yes we need to know Lathe, mill, router, something else, how it works, what outputs it uses, what inputs check what, then we may be able to help.
Without engineers the world stops
Re: Mach3 ATC screenset ER25 collet
« Reply #2 on: May 10, 2020, 05:28:04 PM »
 Hi Graham
 M6Start.m1s macro is to control my tool changer. The 8 tool rack is setup along the Y axis, the spindle has a ER25 power draw bar. which is pneumatic. I am running mach3 on window7. regards Stuart

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3 ATC screenset ER25 collet
« Reply #3 on: May 11, 2020, 03:06:05 AM »
here:
https://www.machsupport.com/forum/index.php?topic=36417.msg249874#msg249874

i have posted some code witch might be a startpoint.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.