Hello Guest it is May 15, 2021, 02:30:19 PM

Author Topic: Problem with Mach3 Image when loading up G code.  (Read 288 times)

0 Members and 1 Guest are viewing this topic.

Problem with Mach3 Image when loading up G code.
« on: May 02, 2020, 02:21:42 AM »
Hi All,

I'm new to the C'N'C and have a system that is using the Mach3 program.
I have a lot of G code programs  but every time i load it up the image in mach3 is off the table at the bottom and you can't see it.
Not sure what i have done or it's something to do with the coding. I have tired many different ones and the same result. Any help would be great.
My father In-law had it working great and it's been handed down to me as he has passed away and i didn't get enough time to learn how to use it before hand.
If you can suggest any courses i could take to help me learn would be a plus.
Thanks again for any help.
Please see attached picture.



Cheers Gary.

Offline TPS

*
  •  2,134 2,134
    • View Profile
Re: Problem with Mach3 Image when loading up G code.
« Reply #1 on: May 02, 2020, 02:48:50 AM »
can you pls. post one of the gcode files?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Problem with Mach3 Image when loading up G code.
« Reply #2 on: May 06, 2020, 12:02:12 AM »
ok i will try and post the G code if that helps
Re: Problem with Mach3 Image when loading up G code.
« Reply #3 on: May 06, 2020, 12:05:54 AM »
attached is one G code

Offline TPS

*
  •  2,134 2,134
    • View Profile
Re: Problem with Mach3 Image when loading up G code.
« Reply #4 on: May 06, 2020, 03:43:42 AM »
it is working here

try to Change Display mode and the Regen Toolpath.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.