Just done a search couldn't find anything.

Phil_H

Phil -

I am using the versi9on of Mach3 that is downloadable from the internet.

As far as I know, there is nothing disabled in the program itself, and it certainly all works fine on my set up (both lathe and mill)

The only thing I know that is limited is the number of lines of cade that can be used, and the downlaodable version is limited to 500 lines of code.

Lazy Cam and I suppose other add ons are limited

Jim

There are a few features that are diasbled. What in particular are you trying to do but can't?

Brett

Thanks for the answers.

It is not connected to my machine as yet.

I know i can't do run from here. But it seems when i run it it has slowed down the feed rates so it starts to run veryyy ssslllooooowwwwllllyyy

Another program i tried to run and of course it stopped at line 501 but i couldn't get it to run again i went to the beginning and pressed start it just went straight to line 501 and stopped.

I have now bought it so hopefully it will work correctly.

Phil_H

Good, if you have any more trouble, let us know.

Brett