Hello Guest it is August 06, 2020, 09:45:56 PM

Author Topic: A axis slave to X axis and B axis slave to Y axis  (Read 2714 times)

0 Members and 1 Guest are viewing this topic.

A axis slave to X axis and B axis slave to Y axis
« on: September 22, 2007, 08:18:40 PM »
Hi, I need to configure: "A axis slave to X axis and B axis slave to Y axis"  but in the menu config -> slave axis there is only one possibility; is possible to make this?

Many thanks

Clax

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: A axis slave to X axis and B axis slave to Y axis
« Reply #1 on: September 22, 2007, 08:54:20 PM »
Hi, Clax

Don't now when it was added but latest ver of Mach3 2.47 has what you need.

Hope this Helps, Chip
Re: A axis slave to X axis and B axis slave to Y axis
« Reply #2 on: September 24, 2007, 06:29:51 PM »
Thanks, I will try that.