Hello Guest it is December 04, 2021, 03:47:37 PM

Author Topic: trying to tune my motors  (Read 832 times)

0 Members and 1 Guest are viewing this topic.

trying to tune my motors
« on: March 19, 2020, 06:20:14 PM »
Hi all-

My plasma table has not worked in years, so I decided it was time for a rebuild.

I ordered a HiCON integra from Vital systems, and switched from Mach 3 to Mach 4

I have to table moving in all directions, but it is choppy at best for the y and Z.

Can someone explain how to tune the motors in both Mach 4 and the Hicon configuration page?

they are 850 IN oz  motors with a 5 to 1 gear box

thanks

steve
Re: trying to tune my motors
« Reply #1 on: March 24, 2020, 04:53:33 PM »
Integra 7866 comes with 30 min of free support using Team Viewer we can look into your motor tuning. Please send an email describing your issue and your available times to support@vitalsystem.com
Re: trying to tune my motors
« Reply #2 on: March 24, 2020, 08:14:06 PM »
Thanks, I did not know that.    I have to wait for warmer weather so I can open the shop doors and get my internet connection.