Hello Guest it is March 28, 2024, 01:05:01 PM

Author Topic: Regen Toolpath Hangs  (Read 2468 times)

0 Members and 1 Guest are viewing this topic.

Re: Regen Toolpath Hangs
« Reply #10 on: February 19, 2020, 09:29:52 AM »
Just curious MitchB, What program did you use to generate the .nc file. I use BobCad. v 28.

Pat
Re: Regen Toolpath Hangs
« Reply #11 on: February 19, 2020, 09:37:50 AM »
I think you should try this version :-

ftp://www.machsupport.com/Mach4/DevlopmentVersions/


Thanks for that suggestion.  As a test, I reinstalled 4300 after seeing that 3804 worked.  4300 still didn't work.  Then I tried version 4410 and that works fine.
Re: Regen Toolpath Hangs
« Reply #12 on: February 19, 2020, 09:38:56 AM »
Just curious MitchB, What program did you use to generate the .nc file. I use BobCad. v 28.

Pat

I used MadCam from Rhino.
Re: Regen Toolpath Hangs
« Reply #13 on: February 19, 2020, 09:42:16 AM »
Since there is interest in the gcode, I've attached a file which causes the problem.

Offline jbuehn

*
  •  101 101
    • View Profile
Re: Regen Toolpath Hangs
« Reply #14 on: February 19, 2020, 11:35:43 AM »
Looks like the M0 may be causing the issue and why it works in v4410

https://www.machsupport.com/forum/index.php?topic=42292.msg275421#msg275421
Re: Regen Toolpath Hangs
« Reply #15 on: February 19, 2020, 12:26:49 PM »
In version 4300, removing all the M codes made no difference.