Hello Guest it is December 02, 2021, 04:35:53 AM

Author Topic: arrow Keys will not move x and y motors see more....... info  (Read 445 times)

0 Members and 1 Guest are viewing this topic.

arrow Keys will not move x and y motors see more....... info
« on: November 25, 2019, 02:52:24 PM »
arrow Keys will not move x and y axis motors from the keyboard. motors do jump when first turned on. using the jog function with the tab  does move the x and y axis but only very slowly. no speed control. I have inserted the plug in in the plug in folder. and the other one in the folder
This is a cross fire plasma table using win 7 on a dell laptop computer.  Thanks for looking and helping.
no g-code function either.
« Last Edit: November 25, 2019, 02:54:09 PM by captainleeward »
Re: arrow Keys will not move x and y motors see more....... info
« Reply #1 on: November 25, 2019, 03:10:09 PM »
Hi Buddy

Check if you in continuous or step mode? Also check whats the default feed rate?
Re: arrow Keys will not move x and y motors see more....... info
« Reply #2 on: November 25, 2019, 05:47:23 PM »
continueuis,  can;t find the last one one?