Hello Guest it is October 10, 2024, 12:44:15 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Integra not responding to pings when on network  (Read 17195 times)

0 Members and 1 Guest are viewing this topic.

Offline kengentry707

*
  • 14 14
Integra not responding to pings when on network
« on: October 15, 2019, 12:40:48 PM »
My CNC Windows 10 PC and Integra 7866 are connected to a simple 5 port Ethernet switch. I also have an Ethernet cable running to my network router. When I have the Windows PC DHCP connect to the WAN it receives an IP on the 192.168.1.x network with a default gateway of 192.168.1.1 (see screenshot). When this happens the Windows 10 PC can't ping the Integra.

When I set a Windows static IP of 192.168.0.10 the PC can ping and connect to the Integra (see screenshot).

The Integra's factory set IP is 192.168.0.99 (see screenshot).

If I update the Integra's IP address to 192.168.1.99 will that allow the Integra be seen on the network?

If not, what change can I make to the Integra's TCP/IP configuration to help it be seen on the network?

Thanks,
Ken

Logged

Offline Vital System Support

*
  • 397 397
Re: Integra not responding to pings when on network
« Reply #1 on: October 15, 2019, 01:36:59 PM »
Quote
If I update the Integra's IP address to 192.168.1.99 will that allow the Integra be seen on the network?
Yes.
Logged

Offline kengentry707

*
  • 14 14
Re: Integra not responding to pings when on network
« Reply #2 on: October 16, 2019, 10:21:40 AM »
Changing the IP address to 192.168.1.99 worked. My controller PC and network router can access the Integra.

Thanks,
Ken
Logged
Pages: 1   Go Up
« previous next »