Hello Guest it is April 23, 2024, 04:47:45 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach4 (4.2.0.4284) Feedrate ??? (wxLathe.set)  (Read 794 times)

0 Members and 1 Guest are viewing this topic.

Offline robertspark

*
  • 595 595
    • View Profile
Mach4 (4.2.0.4284) Feedrate ??? (wxLathe.set)
« on: August 12, 2019, 07:26:29 AM »
Any suggestion why the feedrate for ONE axis at rapid G0 would be higher than the maximum axis velocity set for the motors?

Both motors set at 1200 units / min

units set are mm in config.

MDI
Simple G0 X100 (or Y100) in the simulator

And the feedrate is listed as 1333.33
Logged
Rob

Albert Einstein ― “If you can't explain it to a six year old, you don't understand it yourself.”

Offline robertspark

*
  • 595 595
    • View Profile
Re: Mach4 (4.2.0.4284) Feedrate ??? (wxLathe.set)
« Reply #1 on: August 12, 2019, 09:25:14 AM »
Seems to work as intended / expected within 4.2.0.4162

G0 X100

Feedrate = 1200 units / min = Axis Maximum Velocity
Logged
Rob

Albert Einstein ― “If you can't explain it to a six year old, you don't understand it yourself.”
Pages: 1   Go Up
« previous next »