Hello Guest it is March 28, 2024, 08:35:48 AM

Author Topic: Soft HOLD in Mach4 Lathe.  (Read 745 times)

0 Members and 1 Guest are viewing this topic.

Soft HOLD in Mach4 Lathe.
« on: August 03, 2019, 06:01:43 AM »
Hello.
would it be possible to change HOLD key behavior in Mach4 ??
I ask this because a soft STOP would be necessary.
the reason for this request is that I lose the synchronism of the axes causing me error in the plugin.
I'm using the LATHE version.
CSMIO IP S. hardware
thank you.



Re: Soft HOLD in Mach4 Lathe.
« Reply #1 on: August 03, 2019, 06:22:32 AM »
Hi,
<feed hold> followed by <stop>.

See this thread:

https://www.machsupport.com/forum/index.php?topic=41547.0

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: Soft HOLD in Mach4 Lathe.
« Reply #2 on: August 03, 2019, 08:42:06 AM »
ok.
I read the discussion.
I put the check mark on the stop when I press pause.
it can suffice me, it does not generate more errors.
thank you!