Hello Guest it is June 25, 2019, 08:52:34 PM

Author Topic: change spindle speed (eg. laser power) depending on velocity  (Read 2528 times)

0 Members and 1 Guest are viewing this topic.

change spindle speed (eg. laser power) depending on velocity
« on: August 31, 2007, 07:08:17 AM »
I know that its possible to make the "spindle speed" constroll the power of a laser for an laser engraver, but is there any way to make the software compensate for change in velocity when cutting for example corners.


Re: change spindle speed (eg. laser power) depending on velocity
« Reply #1 on: September 10, 2007, 12:35:55 PM »
That should be under ports and pins Spindle settings... that is what the Lazer option for the spindle should do ...

thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com