The lathe post processor I used in Fusion has the following info when opened:
Copyright (C) 2012-2016 by Autodesk, Inc.
All rights reserved.
Mach3 Lathe post processor configuration.
$Revision: 41301 18455ff67c8df5aa948736e62844bc67de5c8913 $
$Date: 2017-01-27 13:44:58 $
FORKID {506EED9A-A4C0-40D3-BC83-CEC4CE91AAEA}
*/
description = "Generic Mach3 Turning";
vendor = "Artsoft";
vendorUrl = "
http://www.machsupport.com";
legal = "Copyright (C) 2012-2016 by Autodesk, Inc.";
certificationLevel = 2;
minimumRevision = 24000;
longDescription = "Generic turning post for Mach3.";
----------------------------------------------------------------------------
The following is the directory of where Mach3 Turning CPS files are located on my computer:
C:\Users\user\AppData\Local\Autodesk\webdeploy\production\890691bd91ea0296c1b94572fdc7dda4ba2e48f0\Applications\CAM360\Data\Posts
---------------------------------------------------------------------
Note that I did modify the CPS file to remove unwanted code that it generated and frankly you really need to know how to do and what to look for.
There is an "hour long video" on how to modify a post processor, but guessing only that video was on You Tube....so could be wrong.
Sorry, but, it's been over a year since I used Fusion.
RICH