Hello Guest it is March 29, 2024, 08:33:51 AM

Author Topic: MDI does not respond  (Read 10620 times)

0 Members and 1 Guest are viewing this topic.

Re: MDI does not respond
« Reply #10 on: August 15, 2007, 05:21:51 PM »
Can you post a screenshot here so we can look. Sounds like you may be missing some of the bitmaps or the screen set you have is corrupt, you could try installing mach again to see if that clears it up.
Hood

Sorry, I couldn't get it through this way, may be if you submit an e-mail to send you the print screen.

Any way I'm going to reload the program.

         Jovimon


 

Hood

*
Re: MDI does not respond
« Reply #11 on: August 15, 2007, 05:24:26 PM »
Have sent you an email.
Hood
Re: MDI does not respond
« Reply #12 on: August 15, 2007, 06:12:55 PM »
Can you post a screenshot here so we can look. Sounds like you may be missing some of the bitmaps or the screen set you have is corrupt, you could try installing mach again to see if that clears it up.
Hood

I sent the screenshot to the engineering address.

I reloaded the software again from (Mach3 R2.4.0 (Click Here)  -->  (Release LockDown), and I got the same thing (No Reset Buttom anywhere). May be I’m downloading the wrong version?

     Jovimon
« Last Edit: August 15, 2007, 06:36:42 PM by jovimon »

Hood

*
Re: MDI does not respond
« Reply #13 on: August 15, 2007, 06:26:18 PM »
I have sent you an email, so you can just reply to it with the screenshot attached.
Hood
Re: MDI does not respond
« Reply #14 on: August 15, 2007, 06:37:39 PM »
I have sent you an email, so you can just reply to it with the screenshot attached.
Hood

Ok, I already did it to the engineering address. Sorry

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: MDI does not respond
« Reply #15 on: August 15, 2007, 06:47:02 PM »
Quote
I Checked your "precisionchaos" web page, I see you do a great job.

Thanks Jovimon,
    Watch the welcome tutor, will help with attachments.
http://precisionchaos1.com/welcome_tutor_flash/welcome_tutor_flash.html


I have inserted a screen shot of the button you are looking for. If this button is now where on your screens, you might want to back up your XML and any screensets or grabber profiles you have, uninstall Mach, delete the mach3 folder on your c drive, download and reinatall Mach again.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Hood

*
Re: MDI does not respond
« Reply #16 on: August 15, 2007, 06:57:30 PM »
Not got your email :(
Re: MDI does not respond
« Reply #17 on: August 15, 2007, 11:37:17 PM »
Quote
I Checked your "precisionchaos" web page, I see you do a great job.

Thanks Jovimon,
 Watch the welcome tutor, will help with attachments.
http://precisionchaos1.com/welcome_tutor_flash/welcome_tutor_flash.html


I have inserted a screen shot of the button you are looking for. If this button is now where on your screens, you might want to back up your XML and any screensets or grabber profiles you have, uninstall Mach, delete the mach3 folder on your c drive, download and reinatall Mach again.

Brett



I uninstalled Mach and followed all your instructions you suggested, but no change at all. Here I'm including the screenshot in word (doc) of what I'm getting on screen (no Reset Buttom). Shoudl I check the XP optimisation instructions ?.

           

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: MDI does not respond
« Reply #18 on: August 16, 2007, 07:26:03 AM »
OK Jovimon, That helps a lot. A picture is worth a thousand words. THe problem is this, your not seeing all of your screen. Go to general config and check the box Auto Screen Enlarge, Its down at the bottom, center right. You may have to exit mach and re-open for this to take effect. You may need to play with other settings in Screen control, I don't think so though. Give it a go and let us know. If, when you open general cofig. the bottom it it is missing too, grap it at the top and slide it up so you can get to Screen control.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: MDI does not respond
« Reply #19 on: August 16, 2007, 07:32:18 AM »
Also, check out this link. It is a free screen capture program. It is very easy to use and you can save your shots as jpeg and other formats.

http://wisdom-soft.com/products/screenhunter.htm

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!