Hello Guest it is March 28, 2024, 05:45:20 AM

Author Topic: PWM output in the HIcon 7766  (Read 2138 times)

0 Members and 1 Guest are viewing this topic.

Offline lgr

*
  •  44 44
    • View Profile
PWM output in the HIcon 7766
« on: February 05, 2019, 04:22:18 PM »
I'm considering using this board to control a spindle in place of one unused axis' does the Hicon 7766 output a PWM signal? Thanks
Cnc4Pc C41 - PWM Variable Speed Control Board
https://cnc4pc.com/catalogsearch/result/?q=c41
Re: PWM output in the HIcon 7766
« Reply #1 on: February 05, 2019, 05:02:39 PM »
Hello,

The user manual of the C41S describes that it converts a PWM input signal and outputs 0-10VDC.

The HiCON Integra has an onboard 0-10V digital to analog output for controlling a spindle.

Offline lgr

*
  •  44 44
    • View Profile
Re: PWM output in the HIcon 7766
« Reply #2 on: February 05, 2019, 05:23:50 PM »
I'm controlling a second spindle with this board

Offline lgr

*
  •  44 44
    • View Profile
Re: PWM output in the HIcon 7766
« Reply #3 on: February 06, 2019, 06:04:20 PM »
I'm still wondering if this is compatible with the Hicon 7766 to operate a second spindle using an unused axis?
Re: PWM output in the HIcon 7766
« Reply #4 on: February 07, 2019, 10:45:38 AM »
It's possible to implement a PWM output on the board but would require some time and development fees.

One of our customers uses the SPINDLE_FW/REV signals that each drive a separate spindle. The spindles will only move in one direction with that setup though.

If you would like custom software or firmware modifications you can email sales@vitalsystem.com with your request. 

Offline lgr

*
  •  44 44
    • View Profile
Re: PWM output in the HIcon 7766
« Reply #5 on: February 07, 2019, 04:19:03 PM »
Thanks for the information