Below is a script i made with machscreen v1.7. but it tells me the the command is too long and points to the block(first line).
hope someone can help me. Thanks
'probe on Z axis
Probe = 1.89 'probe height
Depth = -1.5 'z negative travel
Feed = 4
Code "G20 G31 Z" & Depth & " F" & Feed
While IsMoving()
Wend
SetOEMDRO(802,Probe)
While IsMoving()
Wend
Code "G91 G00 Z.2"
While IsMoving()
Wend
Code "G90"
End