Hello Guest it is April 19, 2024, 04:25:53 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: G43T Mach3  (Read 1716 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  • 2,505 2,505
    • View Profile
G43T Mach3
« on: January 31, 2019, 12:13:43 PM »
Hi,

has anybody a document witch describes, or maybe knows what a

G43T+toolnumber

exactly does in Mach3.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: G43T Mach3
« Reply #1 on: January 31, 2019, 03:20:21 PM »
It's G43 H#, Tool Length Offset.
I believe it applies a Z axis offset equal to the tool length in the tool table.

Usually used with an ATC, or with fixed length tool holders.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: G43T Mach3
« Reply #2 on: February 01, 2019, 02:44:10 AM »
hello  Gerry,

thank you for the reply.

i am clear about the G43H.

i only ask about the G43T because i found this in a example for ATC and have
no idea what is does, or should do.

TPS 
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: G43T Mach3
« Reply #3 on: February 01, 2019, 06:32:11 AM »
It's not the correct format for G43, so I don't know what it would do.

It should always be G43 H#.

That like asking what would M6 H1 do.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline TPS

*
  • 2,505 2,505
    • View Profile
Re: G43T Mach3
« Reply #4 on: February 01, 2019, 07:05:16 AM »
thats what i thought also.

Thank You
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Re: G43T Mach3
« Reply #5 on: February 11, 2019, 11:12:34 AM »
It could be an old lathe command that is now defunct.

Logged
Without engineers the world stops
Pages: 1   Go Up
« previous next »