Hello
Guest
it is
April 26, 2024, 09:52:41 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
G-Code, CAD, and CAM discussions
/
G43T Mach3
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: G43T Mach3 (Read 1731 times)
0 Members and 1 Guest are viewing this topic.
TPS
2,505
G43T Mach3
«
on:
January 31, 2019, 12:13:43 PM »
Hi,
has anybody a document witch describes, or maybe knows what a
G43T+toolnumber
exactly does in Mach3.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
ger21
6,295
Re: G43T Mach3
«
Reply #1 on:
January 31, 2019, 03:20:21 PM »
It's G43 H#, Tool Length Offset.
I believe it applies a Z axis offset equal to the tool length in the tool table.
Usually used with an ATC, or with fixed length tool holders.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
TPS
2,505
Re: G43T Mach3
«
Reply #2 on:
February 01, 2019, 02:44:10 AM »
hello Gerry,
thank you for the reply.
i am clear about the G43H.
i only ask about the G43T because i found this in a example for ATC and have
no idea what is does, or should do.
TPS
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
ger21
6,295
Re: G43T Mach3
«
Reply #3 on:
February 01, 2019, 06:32:11 AM »
It's not the correct format for G43, so I don't know what it would do.
It should always be G43 H#.
That like asking what would M6 H1 do.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
TPS
2,505
Re: G43T Mach3
«
Reply #4 on:
February 01, 2019, 07:05:16 AM »
thats what i thought also.
Thank You
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Graham Waterworth
2,673
Yorkshire Dales, England
Re: G43T Mach3
«
Reply #5 on:
February 11, 2019, 11:12:34 AM »
It could be an old lathe command that is now defunct.
Logged
Without engineers the world stops
Print
Pages:
1
Go Up
« previous
next »