Hello Guest it is March 28, 2024, 05:21:43 PM

Author Topic: pc crashes in windows 10  (Read 2481 times)

0 Members and 1 Guest are viewing this topic.

pc crashes in windows 10
« on: January 06, 2019, 03:55:15 PM »
Hello,
I am new in mach3.
my pc crashes when I run Mach3. My OS is windows 10 32 bit. I have also run the special driver. Thank you in advance

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: pc crashes in windows 10
« Reply #1 on: January 06, 2019, 04:47:27 PM »
The parallel port driver will not work in Windows 10. You either need to use a 32bit version of Windows 7, or buy an external controller like a UC100 or ESS.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: pc crashes in windows 10
« Reply #2 on: January 23, 2019, 02:09:10 PM »
Hello, I took a uC100, but my pc crashes when I start the software without connecting the controller

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: pc crashes in windows 10
« Reply #3 on: January 23, 2019, 03:01:50 PM »
Make sure you are using the latest version of Mach3 from the website. It's the only version that will run in Windows 10.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: pc crashes in windows 10
« Reply #4 on: January 24, 2019, 01:59:37 AM »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: pc crashes in windows 10
« Reply #5 on: January 29, 2019, 11:48:15 AM »
Thanks for the interest