Hello Guest it is October 27, 2021, 09:58:03 AM

Author Topic: tool changer  (Read 3865 times)

0 Members and 1 Guest are viewing this topic.

Re: tool changer
« Reply #20 on: October 28, 2018, 07:41:54 AM »
Ah ok you mean update
Re: tool changer
« Reply #21 on: October 28, 2018, 07:44:43 AM »
Do you think it will be solved? or is it advisable to change the controller?

Offline Tweakie.CNC

*
  • *
  •  8,835 8,835
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: tool changer
« Reply #22 on: October 28, 2018, 08:00:29 AM »
Unfortunately, this is an issue we are seeing more and more often here on the forum – The cheap Chinese motion controller’s work but they do not fully support all the Mach3 / Mach4 functions so there will always be problems with these products.
Best advice :-  always buy a product which has the manufacturer’s full support and backup – you may pay more initially but you only need to buy once (many members have said this here on the forum “buy cheap, buy twice”).

Tweakie.
KEEP SAFE !

Offline TPS

*
  •  2,202 2,202
    • View Profile
Re: tool changer
« Reply #23 on: October 28, 2018, 02:01:36 PM »
Do you think it will be solved?

i realy don't know,but it is the cheapest way to try.

or is it advisable to change the controller?

would be the next "way" after trying the update way.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline TPS

*
  •  2,202 2,202
    • View Profile
Re: tool changer
« Reply #24 on: October 29, 2018, 02:00:30 AM »
btw. have you checked, that you are using the latest Version of the Controller plugin ?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: tool changer
« Reply #25 on: October 29, 2018, 08:03:41 AM »
hello, excuse my ignorance I am new, how do I do it? thank you.

Offline TPS

*
  •  2,202 2,202
    • View Profile
Re: tool changer
« Reply #26 on: October 29, 2018, 08:39:19 AM »
first of all rename your c:\mach3 Folder to Keep all existing data

here:

https://www.nvcnc.net/xhc-cnc-controller.html

you can find the latest plugin (i think) and saome Manuals how to install a fesh mach3 instalation.

anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: tool changer
« Reply #27 on: October 29, 2018, 04:37:05 PM »
hello, Well, it is already updated, but still the same, where can I look more? thank you.

Offline TPS

*
  •  2,202 2,202
    • View Profile
Re: tool changer
« Reply #28 on: October 30, 2018, 02:47:04 AM »
do you have any Chance to contact the supplier of your Controller ?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline TPS

*
  •  2,202 2,202
    • View Profile
Re: tool changer
« Reply #29 on: November 01, 2018, 05:34:40 AM »
another try would be to run the Programm for test in Single Step (Single BLK), to see
wether the look ahead creates this Problem.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.