Hello Guest it is March 28, 2024, 08:37:34 AM

Author Topic: newbie needing advice  (Read 4296 times)

0 Members and 1 Guest are viewing this topic.

Re: newbie needing advice
« Reply #20 on: May 04, 2018, 10:58:09 AM »
Yes sir that is correct

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: newbie needing advice
« Reply #21 on: May 04, 2018, 11:24:08 AM »
can you please post a screenshot from Config -> System Hotkey's ?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: newbie needing advice
« Reply #22 on: May 04, 2018, 11:29:26 AM »
Yes I can, however it would be later this evening. I am currently away from the shop for today and taking a break from trying to figure this out so I don’t take a torch to this whole setup. LOL

Offline Davek0974

*
  •  2,606 2,606
    • View Profile
Re: newbie needing advice
« Reply #23 on: May 04, 2018, 01:49:14 PM »
What i would next is flip the dir-active-low setting in ports and pins.

Now try jogging but with the OPPOSITE key you would expect so down arrow to move away from you and note the DRO readings +/-

Report back ;)
Re: newbie needing advice
« Reply #24 on: May 04, 2018, 02:19:07 PM »
Ok, i will try that this evening Dave. And let you know what happens. Thanks again

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: newbie needing advice
« Reply #25 on: May 05, 2018, 02:56:46 AM »
first you have the Problem with the arrow key?

arrow up must give positive DRO, then get the movement according to the DRO.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.