Hello Guest it is March 28, 2024, 03:30:04 PM

Author Topic: X Y axis move togehter with Arrows key  (Read 8943 times)

0 Members and 1 Guest are viewing this topic.

Re: X Y axis move togehter with Arrows key
« Reply #10 on: February 24, 2018, 07:59:21 AM »
Hi,
I've had a look at your pin assignments and they look OK.
May I suggest when you post a pic that you crop and resize it with something like 'Paint' so that it will fit on the screen, it helps convey info better.

What I read is:
X axis enabled step= port1 pin 2 dir =port1 pin3
Y axis enabled step=port1 pin 5  dir=port1 pin6
Z axis enabled step=port1 pin 8 dir= port1 pin9
A axis disabled step=port1 pin8 dir=port1 pin9      A duplication, shouldn't matter given that the axis is disabled but confusing, I would correct it.
B axis disabled unassigned
C axis disabled unassigned
Spindle enabled step=port1 pin 17 dir= port1 pin1

Can you confirm? I found it difficult to read the pic having to scan around with the scroll bars.

Thomas's suggestion about checking the active plane is very good.

The other suggestion is that some how you are feeding the same signals to both the X and Y axis drivers. Do you have separate drivers or all on one board?

Craig

Sorry Craig for the Picture I clicked it from my mobile..next time I'll keep in mind and yes the Pin and ports you wrote are right///regards DD
Re: X Y axis move togehter with Arrows key
« Reply #11 on: February 24, 2018, 08:21:03 AM »
I tried G69 nothing happened..Please find enclosed some pictures of controller
Re: X Y axis move togehter with Arrows key
« Reply #12 on: February 24, 2018, 08:42:43 AM »
Please find more pictures for your perusal
Re: X Y axis move togehter with Arrows key
« Reply #13 on: February 24, 2018, 08:44:03 AM »
Picture2

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: X Y axis move togehter with Arrows key
« Reply #14 on: February 24, 2018, 09:04:49 AM »
what manufacturer is this controler, any Manual?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: X Y axis move togehter with Arrows key
« Reply #15 on: February 24, 2018, 09:11:12 AM »
It's Chinese From ...Charmhigh Technology Limited
Re: X Y axis move togehter with Arrows key
« Reply #16 on: February 24, 2018, 10:04:21 AM »
No manual
Re: X Y axis move togehter with Arrows key
« Reply #17 on: February 24, 2018, 10:16:40 AM »
Hi,
I just checked in MPG Mode X+ , Y+ , Y- and X- all are working fine....only with the keyboard it's both moving together...
Re: X Y axis move togehter with Arrows key
« Reply #18 on: February 24, 2018, 11:13:49 AM »
Hi,

is your hotkey assignment ok?


Klaus
The brain isn't a soap, it doesn't shrink when used.
Re: X Y axis move togehter with Arrows key
« Reply #19 on: February 24, 2018, 12:55:14 PM »
let me check