Hello Guest it is March 28, 2024, 04:50:41 PM

Author Topic: RijK words all missing  (Read 2519 times)

0 Members and 1 Guest are viewing this topic.

RijK words all missing
« on: August 24, 2017, 06:29:27 AM »
Hi all.

I am a newbie  I did search the site but found nothing relevant. So please bear with me.

I am running mach3 on an XP system. On some G code files, (not all), containing curves I get an error message

RijK words all missing arclinexx.
 xx varies file to file. And Mach3 obviously  does not display the paths or run the file.

Have I something wrongly set in Mach3 setup or is it just a G code creation error of some sort.

Thanks
Rick

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: RijK words all missing
« Reply #1 on: August 24, 2017, 06:36:11 AM »
It's an error with your g-code.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: RijK words all missing
« Reply #2 on: August 24, 2017, 10:01:07 AM »
Thanks Gerry.
I was pretty sure that was the reason as the G-code generated by another CAM package from the same DXF did not demonstrate the problem.
I just wanted to be sure it was not my setup.

Rick