Hello Guest it is March 20, 2023, 05:54:01 AM

Author Topic: RijK words all missing  (Read 2048 times)

0 Members and 1 Guest are viewing this topic.

RijK words all missing
« on: August 24, 2017, 06:29:27 AM »
Hi all.

I am a newbie  I did search the site but found nothing relevant. So please bear with me.

I am running mach3 on an XP system. On some G code files, (not all), containing curves I get an error message

RijK words all missing arclinexx.
 xx varies file to file. And Mach3 obviously  does not display the paths or run the file.

Have I something wrongly set in Mach3 setup or is it just a G code creation error of some sort.


Offline ger21

  • *
  •  6,293 6,293
    • View Profile
    • The CNC Woodworker
Re: RijK words all missing
« Reply #1 on: August 24, 2017, 06:36:11 AM »
It's an error with your g-code.

2010 Screenset

JointCAM Dovetail and Box Joint software
Re: RijK words all missing
« Reply #2 on: August 24, 2017, 10:01:07 AM »
Thanks Gerry.
I was pretty sure that was the reason as the G-code generated by another CAM package from the same DXF did not demonstrate the problem.
I just wanted to be sure it was not my setup.