Hello Guest it is September 21, 2019, 04:54:26 PM

Author Topic: Mach4 - hicon integra pn7766 - virtual machine  (Read 1415 times)

0 Members and 1 Guest are viewing this topic.

Mach4 - hicon integra pn7766 - virtual machine
« on: June 05, 2017, 09:39:56 AM »
Hello everyone,

I have been reading and I can not find a solution to my problem

I'm working with Mach4 and hicon integra pn7766.

I need to connect a mach4 (running on a virtual machine) with one hicon integra pn7766.

I used the VSI device manager and if I put the same IP address on the network card of the host in the host and  in the virtual machine I can see the card, but when I try to access it I get an error:

Vsi device manager error. Device went missing

Is it possible to perform an execution by communicating with the card from a virtual machine?

Sorry for my english and thank you very much in advance
« Last Edit: June 05, 2017, 09:44:43 AM by clavijin »
Re: Mach4 - hicon integra pn7766 - virtual machine
« Reply #1 on: June 07, 2017, 05:07:29 AM »

I have set up a new network card in bridge mode on the virtual machine as well:

192.168.0.12
255.255.255.0
192.168.0.11   --> this is the ip address on the host


And it seems to be working