Machsupport Forum

Third party software and hardware support forums. => HiCON Motion Controller => Topic started by: clavijin on June 05, 2017, 09:39:56 AM

Title: Mach4 - hicon integra pn7766 - virtual machine
Post by: clavijin on June 05, 2017, 09:39:56 AM

Hello everyone,

I have been reading and I can not find a solution to my problem

I'm working with Mach4 and hicon integra pn7766.

I need to connect a mach4 (running on a virtual machine) with one hicon integra pn7766.

I used the VSI device manager and if I put the same IP address on the network card of the host in the host and  in the virtual machine I can see the card, but when I try to access it I get an error:

Vsi device manager error. Device went missing

Is it possible to perform an execution by communicating with the card from a virtual machine?

Sorry for my english and thank you very much in advance

Title: Re: Mach4 - hicon integra pn7766 - virtual machine
Post by: clavijin on June 07, 2017, 05:07:29 AM

I have set up a new network card in bridge mode on the virtual machine as well:

192.168.0.12
255.255.255.0
192.168.0.11   --> this is the ip address on the host


And it seems to be working