Hello Guest it is December 08, 2019, 01:48:09 PM

Author Topic: Mach3 error message! Help!!!!  (Read 874 times)

0 Members and 1 Guest are viewing this topic.

Mach3 error message! Help!!!!
« on: April 08, 2017, 07:58:19 PM »


I'm sure I did this when I was playing around with brains, macros, etc. But I don't have a clue what I did.

That directory the error message references doesn't exist.  I've reinstalled mach3 and have gone back to the original screen set.  It didn't help a bit. 

Any ideas of what's going on?

Thanks

Sent from my SM-P900 using Tapatalk

Offline ger21

*
  • *
  •  6,289 6,289
    • View Profile
    • The CNC Woodworker
Re: Mach3 error message! Help!!!!
« Reply #1 on: April 08, 2017, 10:06:36 PM »
You installed the MSM screenset, and didn't uninstall it properly.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Mach3 error message! Help!!!!
« Reply #2 on: April 08, 2017, 11:59:43 PM »
You installed the MSM screenset, and didn't uninstall it properly.
Yikes, is that it?  I had the MSM demo but am not a fan of the subscription base software so I uninstalled it.  Do you know if I reinstall the demo then uninstall it, am I'm going make things worse or better?

Thank you! I never would have figured that out.  ;D 

Kelvin

Sent from my SM-P900 using Tapatalk