Hello Guest it is December 10, 2019, 06:41:07 AM

Author Topic: Ports & Pins  (Read 757 times)

0 Members and 1 Guest are viewing this topic.

Ports & Pins
« on: April 08, 2017, 11:25:48 AM »
I can't get the software to communicate to the Breakout board and work the machine.
I used software from Planet-CNC and it will work using USB from PC to the Breakout board (BOB).
I want to use MACH3, but can't get either a USB or DB25 serial port connector to work.

Using Windows 7-32 bit.
Software and driver test successful.
Using keyboard with MACH3, successful.
Communicate and operate through the BOB, unsuccessful.

Any and all help is appreciated.

Offline kolias

*
  •  1,011 1,011
    • View Profile
Re: Ports & Pins
« Reply #1 on: April 08, 2017, 03:02:32 PM »
Which software does not communicate with the BOB? What kind BOB you have? What kind PC you have?
Nicolas