Hello Guest it is March 28, 2024, 11:54:23 AM

Author Topic: Laptop DB25 parallel port ?  (Read 2720 times)

0 Members and 1 Guest are viewing this topic.

Laptop DB25 parallel port ?
« on: February 05, 2017, 02:39:38 PM »
Is there a way to get a laptop that does not have a parallel port only USB ports, to run Mach3 using the parallel port on my C10 BOB?
OK this may be a dumb question but I'm getting desperate to get some installation to work.........................
« Last Edit: February 05, 2017, 02:42:06 PM by gene8522 »

Offline kolias

*
  •  1,154 1,154
    • View Profile
Re: Laptop DB25 parallel port ?
« Reply #1 on: February 05, 2017, 03:14:41 PM »
Laptops in general no recommended to run Mach3 due to the lower voltage they run and witout a paraller port no way. But I think there is warp or smoothstepper which connect to a usb but I'm not familiar with that. Google Mach3 usb
Nicolas

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Laptop DB25 parallel port ?
« Reply #2 on: February 05, 2017, 03:15:48 PM »
Yes, with a UC100 motion controller.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Laptop DB25 parallel port ?
« Reply #3 on: February 05, 2017, 04:33:06 PM »
Thank Garry I thought that that would be the answer I would get. Will the UC100 work on a 64 bit PC?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Laptop DB25 parallel port ?
« Reply #4 on: February 05, 2017, 05:07:19 PM »
Yes
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html