Hello Guest it is March 28, 2024, 08:08:11 AM

Author Topic: Screen 4 for lathe  (Read 3468 times)

0 Members and 1 Guest are viewing this topic.

Offline MarkC

*
  •  94 94
    • View Profile
Screen 4 for lathe
« on: June 10, 2007, 07:56:56 PM »
Hi,
Does the command"set next line" not work in lathe (V2.0.040)?
I added a button to my screen and when I press it I get the diologue and menu for"run from here"

Thanks in advance
Mark
Re: Screen 4 for lathe
« Reply #1 on: June 11, 2007, 09:53:29 AM »
I don't think it will work :(

We will have to redo that section of code to get that working in Lathe.

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline MarkC

*
  •  94 94
    • View Profile
Re: Screen 4 for lathe
« Reply #2 on: June 11, 2007, 08:31:31 PM »
OK
Thanks Brian, I think I've found out how to post code so I can use the "Run From Here" command instead

Mark
« Last Edit: June 11, 2007, 08:35:56 PM by MarkC »
Mark

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Screen 4 for lathe
« Reply #3 on: June 12, 2007, 10:24:55 AM »
Hi, Mark

Hears a Turn.Lset based on mill screens with added big screen and Lathe Tab pop-out MPG, It's a work in progress .Lset

Had to Zip it, Hay Brian when you get time could you Add .Lset to file Up-Load Options Hear, Thanks.

Hope this Helps, Chip

Hood

*
Re: Screen 4 for lathe
« Reply #4 on: June 12, 2007, 03:36:30 PM »
Hi Chip, I have added lset to the list, hope it works.
Hood

Offline MarkC

*
  •  94 94
    • View Profile
Re: Screen 4 for lathe
« Reply #5 on: June 12, 2007, 08:46:17 PM »
Hey Chip Thanks.
I've been wanting to do a screenset based on mill for the lathe. This gives me a head start

Mark
Mark

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Screen 4 for lathe
« Reply #6 on: June 12, 2007, 09:57:35 PM »
Hi, Hood & Mark

Looks like it works

Working on the Lset when time permits, enjoy.

Thanks, Chip