Hi people - I was looking at purchasing this and then saw that the threading was using G94 (mm/min). I use the standard Mach3 *********.062 and as such it uses G95 (mm/rev).
How will this effect my threading Gcode - (the stuff I already have)
thanks
Steve
Your current G-codes that is working will continue to work. Read first 2 posts and pay attention to 2nd post. All is working and tested.
Modified "Quick Threads" from G76 to G32 cycles with working threading for lathes.
G76 did not worked because of rapid infeed at crazy rates, for example, in metric threads at 1000RPM and pitch 1.5mm machine started operating at F1.5/rev ignoring Mach3 Motor Tuning settings and tried to do rapid feed on very small distances at 1500mm/min momentary which causes missing steps for steppers and PID error for Servo systems.
Everything is tested and works with included Threading wizard