Hello Guest it is September 15, 2019, 11:06:25 PM

Author Topic: Mach3  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

Mach3
« on: September 27, 2015, 07:03:36 AM »
Does Mach3 have the ability to rotate or mirror cutter path?

Paul

Offline RICH

*
  • *
  •  7,358 7,358
    • View Profile
Re: Mach3
« Reply #1 on: September 27, 2015, 03:03:25 PM »
Paul,
Have a read of the Mach manual, lost s of good info in it.

You can rotate an axis with G68 and mirror using a (-) in the scale input, if  I recall correctly , see also G51 command.

RICH
Re: Mach3
« Reply #2 on: September 28, 2015, 07:57:35 AM »
Paul,
Have a read of the Mach manual, lost s of good info in it.

You can rotate an axis with G68 and mirror using a (-) in the scale input, if  I recall correctly , see also G51 command.

RICH

Honestly I have not read the manual beyond my intital startup, but I will do it now.  Thank you for the quick response.

Paul