Hello Guest it is September 20, 2019, 01:05:15 PM

Author Topic: Mach3 license problem  (Read 2355 times)

0 Members and 1 Guest are viewing this topic.

Mach3 license problem
« on: September 20, 2015, 05:37:57 AM »
Hello everybody,

I have bought Mach3 license few years ago and is installed in two PCs. Both have worked well.
Now both PCs reports that "Evaluation limit reached". Is there expiration date? Should I buy an new license?

What should I do?

Thanks in advance

BR

Sauli
less is more

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: Mach3 license problem
« Reply #1 on: September 20, 2015, 07:26:48 AM »
Contact license@machsupport.com
I've never seen this before.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Mach3 license problem
« Reply #2 on: September 20, 2015, 01:29:56 PM »
Thanks Gerry

BR

Sauli
less is more

Offline BR549

*
  •  6,898 6,898
    • View Profile
Re: Mach3 license problem
« Reply #3 on: September 20, 2015, 02:30:19 PM »
I think the problem may be in the screenset (;-)

(;-) TP
Re: Mach3 license problem
« Reply #4 on: September 22, 2015, 12:38:07 PM »
license@machsupport.com is for automatic license delivery only.

Same results with standard 1024.set-file

BR

Sauli
less is more

Offline Tweakie.CNC

*
  • *
  •  7,909 7,909
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach3 license problem
« Reply #5 on: September 22, 2015, 12:47:04 PM »
This is a problem I have not seen before and I was surprised to hear that it is not related to the screen .set, as Terry has mentioned.

Please use the contact form to make an inquiry regarding your Mach3 license.  http://www.machsupport.com/contact-us/

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline RICH

*
  • *
  •  7,361 7,361
    • View Profile
Re: Mach3 license problem
« Reply #6 on: September 22, 2015, 08:51:22 PM »
Who did you buy the license from?

RICH

Offline BR549

*
  •  6,898 6,898
    • View Profile
Re: Mach3 license problem
« Reply #7 on: September 22, 2015, 09:07:02 PM »
That screenset is normally linked to the Ivan license many times.

(;-) TP
Re: Mach3 license problem
« Reply #8 on: September 24, 2015, 11:53:03 AM »
I've bought it from Machsupport Scott Nichols, Feb 10th 2008.
less is more

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Mach3 license problem
« Reply #9 on: September 24, 2015, 12:59:51 PM »
who did you buy the sheetcam license from?