Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: saulij on September 20, 2015, 05:37:57 AM

Title: Mach3 license problem
Post by: saulij on September 20, 2015, 05:37:57 AM
Hello everybody,

I have bought Mach3 license few years ago and is installed in two PCs. Both have worked well.
Now both PCs reports that "Evaluation limit reached". Is there expiration date? Should I buy an new license?

What should I do?

Thanks in advance

BR

Sauli
Title: Re: Mach3 license problem
Post by: ger21 on September 20, 2015, 07:26:48 AM
Contact license@machsupport.com
I've never seen this before.
Title: Re: Mach3 license problem
Post by: saulij on September 20, 2015, 01:29:56 PM
Thanks Gerry

BR

Sauli
Title: Re: Mach3 license problem
Post by: BR549 on September 20, 2015, 02:30:19 PM
I think the problem may be in the screenset (;-)

(;-) TP
Title: Re: Mach3 license problem
Post by: saulij on September 22, 2015, 12:38:07 PM
license@machsupport.com is for automatic license delivery only.

Same results with standard 1024.set-file

BR

Sauli
Title: Re: Mach3 license problem
Post by: Tweakie.CNC on September 22, 2015, 12:47:04 PM
This is a problem I have not seen before and I was surprised to hear that it is not related to the screen .set, as Terry has mentioned.

Please use the contact form to make an inquiry regarding your Mach3 license.  http://www.machsupport.com/contact-us/

Tweakie.
Title: Re: Mach3 license problem
Post by: RICH on September 22, 2015, 08:51:22 PM
Who did you buy the license from?

RICH
Title: Re: Mach3 license problem
Post by: BR549 on September 22, 2015, 09:07:02 PM
That screenset is normally linked to the Ivan license many times.

(;-) TP
Title: Re: Mach3 license problem
Post by: saulij on September 24, 2015, 11:53:03 AM
I've bought it from Machsupport Scott Nichols, Feb 10th 2008.
Title: Re: Mach3 license problem
Post by: stirling on September 24, 2015, 12:59:51 PM
who did you buy the sheetcam license from?