Hello

I have one strange problem with G0 feedrate.
Maximum speed displacements in "Motor Tuning" is set to 8000 mm / min. and it is actually that when moving machine with the arrow keys.
Even when I write to the MDI, for example:
G01 X200 F6000
the moving is correct  - fast.

However, if I write:
 G0 X200,
the moving is reduced to 1000mm/min. (also in the window "feedrate")
Also from G-code  G0 is slow, just 1000 mm / min.

I checked all the possible settings ....... please if anyone can help me before I go crazy.


Thanks

Is your rapid override set lower than 100%?

No, is set on 100%
Rapid override is working properly.

F is always 1000 (when caled G0)
FRO is changing if I change rapid override but always   1000 * rapid override (%)

I'm still not able to find the cause of the slow moving ... unfortunately 

Hello

Anyone with the same problems?

Any suggestions to resolve the problem?

Thanx!

Attach your xml and I will see if I can find the problem.
Hood