Hello Guest it is March 29, 2024, 08:19:15 AM

Author Topic: G0 Feedrate is not on maximum  (Read 2436 times)

0 Members and 1 Guest are viewing this topic.

G0 Feedrate is not on maximum
« on: June 16, 2015, 12:34:46 PM »
Hello

I have one strange problem with G0 feedrate.
Maximum speed displacements in "Motor Tuning" is set to 8000 mm / min. and it is actually that when moving machine with the arrow keys.
Even when I write to the MDI, for example:
G01 X200 F6000
the moving is correct  - fast.

However, if I write:
 G0 X200,
the moving is reduced to 1000mm/min. (also in the window "feedrate")
Also from G-code  G0 is slow, just 1000 mm / min.

I checked all the possible settings ....... please if anyone can help me before I go crazy.


Thanks

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: G0 Feedrate is not on maximum
« Reply #1 on: June 16, 2015, 03:34:32 PM »
Is your rapid override set lower than 100%?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: G0 Feedrate is not on maximum
« Reply #2 on: June 16, 2015, 03:51:04 PM »
No, is set on 100%
Rapid override is working properly.

F is always 1000 (when caled G0)
FRO is changing if I change rapid override but always   1000 * rapid override (%)
Re: G0 Feedrate is not on maximum
« Reply #3 on: June 22, 2015, 01:22:22 PM »
I'm still not able to find the cause of the slow moving ... unfortunately  :( ??? :-[
Re: G0 Feedrate is not on maximum
« Reply #4 on: August 31, 2015, 03:47:04 AM »
Hello

Anyone with the same problems?

Any suggestions to resolve the problem?

Thanx!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: G0 Feedrate is not on maximum
« Reply #5 on: September 01, 2015, 05:59:01 PM »
Attach your xml and I will see if I can find the problem.
Hood