Hello Guest it is March 29, 2024, 05:47:35 AM

Author Topic: Brain play.....  (Read 2619 times)

0 Members and 1 Guest are viewing this topic.

Brain play.....
« on: April 10, 2015, 09:08:42 AM »
Hi all
Just started to have a look at the brain function and have a question. Mainly I can't find cycle start command in the brain editor list.

I want to have cycle start trigger output 1 and  stop (not estop) turn it off again.

At the moment I have a start in m code but if I hit stop,  it stops motor on output 1 but won't restart when I hit cycle start again.

I thought if I use the brain I could trigger output 1 from start cycle and stop buttons.

Once this is sorted id like to add a remote start stop button via inputs.

Appreciate any help on this.

Thanks Dave

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Brain play.....
« Reply #1 on: April 11, 2015, 05:22:26 AM »
You'd be far better off using a screen editor and putting the code straight into the buttons

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Brain play.....
« Reply #2 on: April 11, 2015, 07:10:13 AM »
Can you monitor LED 904 and have it trigger the output?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Brain play.....
« Reply #3 on: April 11, 2015, 08:52:12 AM »
Thanks guys
Couldn't find LED 904.

Also had a look at the screen editor program but couldn't see how to change command.

O we'll, I'll keep playing.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Brain play.....
« Reply #4 on: April 11, 2015, 09:05:27 AM »
Sorry, it's 804

LED 804 is the Run LED.
Create a brain to activate Output 1 whenever LED 804 is on. It should do exactly what you want to do.
« Last Edit: April 11, 2015, 09:06:59 AM by ger21 »
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Brain play.....
« Reply #5 on: April 12, 2015, 08:05:36 AM »
Found the led 804, so what command do I tell it to do? I tried getting to trigger at >0 but that didn't do it.....

Cheers

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Brain play.....
« Reply #6 on: April 13, 2015, 02:18:38 PM »
No Operation Pass Signal would most likely be what you want.
Hood