Hello Guest it is March 28, 2024, 07:19:26 AM

Author Topic: only smal part in mach3 3  (Read 6033 times)

0 Members and 1 Guest are viewing this topic.

only smal part in mach3 3
« on: April 19, 2007, 04:57:53 PM »
Hello,

When i put a dxf file in lazycam (newest version oncl mach3) and export it to mach3 the file only has a little part of the complete drawing on the tooltable. It is show in a jellow striped box and when i run the router it stops when it's on the stripe. Is this a problem somone now how to fix that?

Kind regards:
Bas

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: only smal part in mach3 3
« Reply #1 on: April 19, 2007, 07:05:28 PM »
Hey Bas,
   Can you post a screen shot of your tool path screen and the g code file?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: only smal part in mach3 3
« Reply #2 on: April 19, 2007, 08:58:18 PM »
You can't load a spine in that rev... We hope to have that working soon :)

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: only smal part in mach3 3
« Reply #3 on: April 20, 2007, 03:14:38 PM »
Hello,

Picture on this link:
http://www.homecockpitbuilder.com/mach3

Gcode on this file

http://www.homecockpitbuilder.com/gcode.tap


Hello Brain,


Can you explane what a spine means?

Regards Bas

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: only smal part in mach3 3
« Reply #4 on: April 21, 2007, 02:46:31 AM »
Is Mach running as a demo, you can only process 1000 lines of code in the demo and your file is 5600 lines long.

Graham.
Without engineers the world stops
Re: only smal part in mach3 3
« Reply #5 on: April 21, 2007, 04:04:33 PM »
Ok Graham, thats the problem. Do i need only a licence for mach3 or also for lazycam?

regards Bas

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: only smal part in mach3 3
« Reply #6 on: April 21, 2007, 04:07:44 PM »
The Mach3 licence covers the basic LazyCAM, if you want the pro version of LazyCAM its $50.00 more

Graham.
Without engineers the world stops
Re: only smal part in mach3 3
« Reply #7 on: April 21, 2007, 04:18:35 PM »
Hello Graham,

But when i only purcase mach3 its no problem to mill these file's.

regards Bas

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: only smal part in mach3 3
« Reply #8 on: April 21, 2007, 05:20:55 PM »
No problem at all, it will work fine.
Without engineers the world stops
Re: only smal part in mach3 3
« Reply #9 on: April 21, 2007, 05:26:30 PM »
Ok then i purcase a licence

Regards Bas