Ok for the brainy people.....
I have a 3020, on an XP machine. With a Parallel port. I have Mach 3 set up to the point of being able to move the motors. all three axis work. I also have Mach 4 and Darwin, that I want to use to learn it, while I work on a Mill build.
I have all the same port settings and pin settings in both versions.
In Darwin setup, I get indicator light changes on the port page, when I jog the motors.
I get green indicators and movement on the velocity indicators on the motor tab.
I get a reset change when I hit the estop on the controller box.
BUT... I get no physical motor movement in Mach4
So I'm at a loss of what to try next.
I would appreciate your thoughts
BAR