Hi All, I do not run my cnc router allot, and Mach3 is goooood, therefore i am not seen in this forum allot.
But now I have a problem: in the "program run screen" (the first screen) When i set a line number in the space above "run from here", it works perfectly as long as the line number is below around 920.000. If i press 1.320.000 for instance, then the machine always want to start at line 920.000 whatever i do. also, i get a red flashing reset button. (It is not exactly 920.000, but somewhere close to that)
I am running Version R3.043.067 on an old windows XP.
Can I do something to get it working. This is a particularly boring situation when a thin tool brakes in a 1400.000 line program.
At the moment I solve this by deleting 80.000 line in the program editor.
Thank you,
Willy