Hello Guest it is April 01, 2020, 11:09:25 PM

Author Topic: "run from here" problem  (Read 3053 times)

0 Members and 1 Guest are viewing this topic.

Offline dude1

*
  •  1,253 1,253
    • View Profile
Re: "run from here" problem
« Reply #10 on: February 09, 2015, 01:23:44 PM »
just install 62 nothing else

Offline 1Acnc

*
  •  28 28
    • View Profile
Re: "run from here" problem
« Reply #11 on: February 13, 2015, 09:10:26 PM »
I ran into the same problem today, does rev 62 fix this problem?
Re: "run from here" problem
« Reply #12 on: February 13, 2015, 09:37:31 PM »
1Acn,
 i did not do it, I only CNC ones in a wile.

Offline dude1

*
  •  1,253 1,253
    • View Profile
Re: "run from here" problem
« Reply #13 on: February 13, 2015, 10:12:16 PM »
don't know never had that problem I changed for other reasons but I have a lucky computer it don't have problems or I should say its a stable computer that handles M3 like a dream.

its a point I made a few weeks ago one computer was being a pain swapped for the computer on my machine problems went away only change I made was the computer.

I talk to my computer guy he said if the ram and hard drive are not at the same clock speed or faster than the cpu, the computer can be complete junk and give all sorts of wearied problems. (hes a gray Hat)

so it could be the version of M3 or the computer change versions of M3 if it goes away it`s the M3 version if not it still could be the version of M3 or computer.

its a hard one to nail down what is the problem making it happen

Offline 1Acnc

*
  •  28 28
    • View Profile
Re: "run from here" problem
« Reply #14 on: February 13, 2015, 11:33:20 PM »
Thanks for the replies.