Hello Guest it is March 28, 2024, 03:39:03 PM

Author Topic: - fixture save...  (Read 5747 times)

0 Members and 1 Guest are viewing this topic.

- fixture save...
« on: August 14, 2014, 11:27:46 AM »
i'm using mach3 r3.043.066.
it never ask me to save fixture. i tried with the option "optional offset save"
checked and un-checked. i created a button(122) so i can save it but would like
to make a safety so it would ask when i close.
 Thanks !
Kenneth

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: - fixture save...
« Reply #1 on: August 14, 2014, 11:37:28 AM »
Check Optional Offset Save.
Close and Restart Mach3.
Zero an axis. (that's not already zero)
Close Mach3.

You should see the message to save.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: - fixture save...
« Reply #2 on: August 14, 2014, 11:44:55 AM »
that didn't show the option to save.
it does show to end session.
Thanks
« Last Edit: August 14, 2014, 11:53:30 AM by Kenneth »
Kenneth

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: - fixture save...
« Reply #3 on: August 15, 2014, 06:44:57 PM »
Attach your xml and I will take a look and see if I can replicate your issue.
Hood
Re: - fixture save...
« Reply #4 on: August 18, 2014, 05:19:12 AM »
Thanks !
Kenneth
Re: - fixture save...
« Reply #5 on: August 18, 2014, 06:59:35 AM »
thanks again Hood !
Kenneth
Re: - fixture save...
« Reply #6 on: August 28, 2014, 10:59:49 AM »
still having the problem. what do i look for in the xml file ?
did i attach the correct file ? should i START from scratch
or is it also part of machscreen(1.60) ?
Thanks for any help !
Kenneth
Re: - fixture save...
« Reply #7 on: August 28, 2014, 12:10:42 PM »
i fixed it by deleting the xml file and reopening mach3 and then loading my set file.
it ask to save fixture but doesn't really save position. is there something else i can
do ?  Thanks !
Kenneth
Re: - fixture save...
« Reply #8 on: September 03, 2014, 11:04:16 AM »
am i asking REALLY dumb questions ?
BESIDES this one.
« Last Edit: September 03, 2014, 11:07:03 AM by Kenneth »
Kenneth
Re: - fixture save...
« Reply #9 on: September 04, 2014, 08:21:30 AM »
Please don't tell me i can't get help cause i don't like M4 ?
Kenneth